Loglap Cabin without Veranda – Pressure Treated

£2,469.00

Specifications

Our Loglap Cabin comes in sizes from 8ft x 6ft to 16ft x 10ft. If you’d prefer a Loglap Cabin with veranda then take a look here.

  • Roof: Heavy duty mineral felt. Tongue & groove cladding. Extra strong roof framework. Fully trussed roof to prevent sagging.
  • Walls: Extra strong 75mm x 50mm heavy framework with diagonal bracing for extra strength and durability. Loglap tongue and groove pressure treated cladding. Stainless steel nails.
  • Floor: Tongue and groove flooring, fixed to narrowly spaced floor beams and floor runners, which gives a strong floor with a 3 inch permanent dry air flow.
  • Windows: Four fixed Georgian joinery windows fully glazed with toughened glass. 8 x 6 buildings come with narrower front windows.
  • Doors: Double Georgian joinery doors fully glazed with toughened glass. Black antique door furniture, including antique handle lock and key, two door bolts, and six turn buttons.
  • 18” roof overhang.

* Buildings over 12′ width will be over 2.5m. The width and depth of these buildings can be reversed FOC to make them under 2.5m.

Category:
Add to Wishlist
Add to Wishlist

    Protect TF200 is a high performance breather membrane with high wet strength, water resistance and vapour permeability. Available in Red, Blue, Black and Green.

    All our pressure treated buildings include a high quality polyester mineral felt as standard. Why not upgrade to felt shingle tiles or a long life EPDM rubber roof?

    Walls Insulated with rockwool, roof and walls cladded using pine match boarding, giving a total wall thickness of 110mm. Keeps your building cool in Summer and warm in Winter.

    A free site survey is available to inspect your current base. If you choose a concrete base then a free site survey is required before installation. Please beware that bases will increase the height of a building. Building heights shown are for the building only. The customer takes full responsibility for added height due to upgrades. Once installed, these bases guarantee your building installation.

  • Protek Royal Exterior is a quick-drying water-based product that is robust, hard wearing, and can be applied to all pressure-treated timber. It is recommended that 3-4 coats be applied. 1 litre will cover approximately 8m². Protek Royal is a high-build formulation, so each extra coat increases the colour, sheen and protection to help weatherproof your building. For added protection, a clear top coat is recommended. Gutters are strongly recommended on all buildings. This product is for self-application.

Total
£2,469.00
Quantity