Delivery Information

To track your order on the morning of delivery, please visit skinners-sheds.com/order-tracking and type in your order number.

If laying a timber base, please call your nearest showsite for advice. For shed floors which are 6 x 4, 7 x 5, 10 x 6, and 10 x 8, our floor bearers will run the long way, every 24″. Your bearers must run the short way and always opposite to ours. The perfect base is a concrete base which is complely flat and level, with no raised or low areas. Alternatively, concrete paving slabs may be used, which must cover the whole area and be perfectly flat and level. The size of the base needs to be at least the size of the floor area, but no smaller.  The roof over hang will always be larger. For log cabins please confirm footprint at time of order.

Please allow a maintenance area around your building to waterproof it. You may also need to add gutters. If you have any queries, you can always call or visit your nearest showsite.

The panels must go around your property, not through it. If necessary, and in order to accommodate, please remove fence panels or any obstructions (e.g. overhanging tree limbs, arches, wires or gutters etc.).

If going through gates, there must be no arches, bars or lintels above. Remember; these panels and roofs can be extremely heavy and normally there are only two people in each van. These personnel are employed to assemble your building and not to rectify your base or access problems. You are always welcome to arrange a FREE site visit if you have any doubts by calling us or visiting your local show site. Panels can be manufactured in smaller sizes to fit through size restricted areas at an addtional cost.